DESCRIPTION:
[Major features]
- Separate structure for hub housing and main unit
- Industry first design based on negative included angle
- Can be used with normal knuckle characteristics by assembling with positive included angle
- Trail is 0mm/+3mm/-3mm
- Included angle is +3°/-3°
- Achieves a different dimension of turning angle by avoiding tie rods
- Can be changed to a variety of settings by developing optional hub housings in the future
[Split structure]
The split structure of the hub housing and main unit allows you to change the included angle, trail, and camber without changing the Ackerman.
Hub housings to be released in the future will allow for even more detailed changes.
*Please prepare four 850 bearings separately.
*Axles with a diameter of Φ5 can be used, but we recommend those with a shaft that does not protrude inward.
[Included angle]
Negative included angle / Plus included angle
You can use different characteristics.
・Negative included angle (recommended)
Caster near 0°, plus (positive) By combining with trail, we have achieved a high trace feeling that does not break down at any angle from shallow to deep angles.
・Plus included angle
It is close to the characteristics of a general knuckle and is compatible with conventional settings.
About Included Angle
https://ameblo.jp/hikotetsu/entry-12860892159.html
About the trail
: https://ameblo.jp/hikotetsu/entry-12860898296.html
About the cutting angle
https://ameblo.jp/hikotetsu/entry-12860996963.html
About bearings and axles
https://ameblo.jp/hikotetsu/entry-12861352780.html
Scheduled for release in mid-November.
This product is a pre-order item.
If you purchase this item together with other items, the pre-order items will be shipped as soon as they arrive.