〇Product Description
[R31S315] Inset rear aluminum knuckle with adjustable geometry H arm system is now available as a set! Input from the arm is achieved
by making the axis of rotation (axle axis) of the tire act on the inside. It is possible to increase the response of installation pressure.
Not only can it be used with the optional [R31S322] Adjustable Geometry Lower Arm Set, but it can also be installed on the GRKGS2EVO standard resin H arm.
〇Product contents
- Inset aluminum knuckle body (2 pieces)
- [R31M138] 1050 x 3mm bearing (2 pieces)
- [R31M103] 1510 bearing (2 pieces)
- [R31S005] King pin adjustment collar M2.6 x 0.5mm aluminum Spacer (4 pieces)
・[R31W435] Universal shaft 48mm (2 pieces)
・[R31W310] GRK3AWD Cross Spider 2mm (2 pieces)
・[R31W311] GRK3 AWD Cross Spider Pin 2x10mm (2 pieces)
・[R31W309] GRK3 Front axle (2 pieces)
〇Notes when installing this product to the GRK Global Series standard resin H arm.
It is possible to install the knuckle alone, but
if you change the hub to the [R31W339] GRK brake rotor,
the back of the rotor will interfere with the rib part of the lower arm.
(You can install a brake rotor by removing the rib part, but we do not recommend it.)
If you want to install a brake rotor, please install it at the same time as the [R31S322] Adjustable Geometry Lower Arm. I recommend it.
〇 commodity explanation
By making the tire rotation axis (axle axis) act inward, the response of the input installation pressure from the arm can be increased.
Not only can it be used with the separately sold [R31S322] adjustable geometry lower arm set, but it can also be attached to the GRKGS2EVO standard resin H arm.
〇 commodity contents
・Inset aluminum knuckle body (2 pieces)
・[R31M138] 1050×3mm bearing (2 pieces)
・[R31M103] 1510 bearings (2 pieces)
・[R31S005 ] King pin adjustment collar M2.6×0.5mm aluminum spacer (4 pieces)
・[R31W435] Universal shaft 48mm (2 pieces)
・[R31W310] GRK3AWD Cross Spider 2mm (2 pieces)
・[R31W311] GRK3 AWD cross spider pin 2x10mm (2 pieces)
・[R31W309] GRK3 front axle (2)
〇 Precautions when installing this product on the standard resin H arm of the GRK global series.
Although it is possible to install the knuckle alone
When changing the hub to [R31W339] GRK brake rotor
The back of the rotor will interfere with the rib part of the lower arm.
(It is possible to install a brake rotor by removing the rib part, but we do not recommend it.)
If you would like to install a brake rotor , we recommend installing it together with the [R31S322] Adjustable Geometry Lower Arm.